Welcome to Honda CX500 & GL500 Forum Sign in | Join | Faq

Technical Help Forum

Started by A1stimer at 03-08-2010 9:10 AM. Topic has 5 replies.

Print
Sort Posts:    
   03-08-2010, 9:10 AM
A1stimer is not online. Last active: 3/9/2010 7:27:17 PM A1stimer

Not Ranked
Joined on 02-07-2010
central florida
Posts 8
wont start
Reply Quote
i was riding last night and it started to putter. and then shut down. it started after i messed with the plug wires and i was getting spark, but then it shut down a mile down the road. i got it to fire up for a min, but not long enough to ride off. this morning im not getting spark. i mettered all the fuzes. and the plugs are new. any ideas at this point would be awesome i just broke my axle on the daily and its down as well..stuck 30 min from the house 45 from the car. thanks!
83 cx650c
   Report 
   03-08-2010, 9:31 AM
DaveF is not online. Last active: 7/23/2010 12:23:26 PM DaveF



Top 25 Posts
Joined on 06-11-2008
Lawrenceville, GA
Posts 1,232
Re: wont start
Reply Quote
What kind of bike do you have?

Please take a few minutes to edit your profile to show your location and to edit your signature to show your bike's year and model.  This will help us to help you.


My Web Site
1982 GL500
1983 GL650
   Report 
   03-08-2010, 9:39 AM
A1stimer is not online. Last active: 3/9/2010 7:27:17 PM A1stimer

Not Ranked
Joined on 02-07-2010
central florida
Posts 8
Re: wont start
Reply Quote
83 honda cx650c
83 cx650c
   Report 
   03-08-2010, 9:47 AM
DaveF is not online. Last active: 7/23/2010 12:23:26 PM DaveF



Top 25 Posts
Joined on 06-11-2008
Lawrenceville, GA
Posts 1,232
Re: wont start
Reply Quote
Ok, that's a big help.  Your bike has the TI ignition, which is very reliable.

Does the engine turn over ok, and you're just not getting spark?

Let's check the voltage gettting to the igniters first.  Set the meter to measure DC volts and connect the meter negative lead to the negative battery terminal.  With the ignition switch set to on, connect the positive meter lead to the Black/White wire on either of the igniter modules.  What voltage do you measure here?


My Web Site
1982 GL500
1983 GL650
   Report 
   03-08-2010, 10:11 PM
DavidfromWisconsin is not online. Last active: 7/19/2010 7:37:23 PM DavidfromWisconsin



Top 25 Posts
Joined on 03-19-2008
Appleton, WI
Posts 2,458
Re: wont start
Reply Quote
In the daylight it is sometimes hard to see the spark ... so my question is a basic one ... did you check to see if you are out of gas?

Sometimes it is the simple things.


David From Wisconsin ... R80Dave
'82 GL500I alias Candy
'82 GL500I alias Candy II
'00 BMW K1200LT & trailer
'81 KZ440 (Wife's learning bike)

   Report 
   03-09-2010, 11:25 AM
A1stimer is not online. Last active: 3/9/2010 7:27:17 PM A1stimer

Not Ranked
Joined on 02-07-2010
central florida
Posts 8
Computer [co] Re: wont start
Reply Quote
I did get it running all tho who knows what did it. I tested and made sure the coils were grounded well. Finally got spark. I tested to make sure the bike was getting fuel it was. But still wouldn't fire up. The kill switch was not on. I cut alittle off the plug wires and re tightened them. And flipped alittle switch on the left hindle. Clicks a relay near the coils. All still wouldn't start. Then all the sudden I walked over to te bike and just thought "start!" an when I cranked it. Bam started. Idk I did things one at a time and never found exactly what did it. But it's running strong now.
83 cx650c
   Report 
Honda CX500 & G... » CX500 GL500 Tra... » Technical Help ... » Re: wont start

Powered by Community Server, by Telligent Systems