|
|
Selling and Buying Forum
Started by philbrewer at 05-10-2010 6:32 PM. Topic has 34 replies.
  
|
|
Sort Posts:
|
|
|
|
 05-10-2010, 6:32 PM
|
philbrewer
Joined on 04-26-2010
Detroit, MI
Posts 149
|
Parts from my 78 CX project
|
|
|
|
|
PICS ADDED AT BOTTOM
Original handlebars (good shape) - $20.
Choke cable - $10
33mm Fork "uppers" - $10
33mm Fork "lowers" - $10
Front brake caliper mount - $15
Mirrors (set) - $20 [SOLD]
Right side cover (with rubber mounts) - $10
Rear grab bar (Good chrome) - $20
Tail light and housing - $35
Speedo/Tach/Dummy Lights (small crack)- $55
Seat (recovered/no rust/good shape) -$75
Will not refuse any decent offer. I need to get rid of the parts to help fund the project. I also have tons of carb parts from the same bike, shoot me a PM.
1x float bowls
2x carb body [SOLD]
1x floats (black)
1x float needle
3x #78 jet
2x float bowl drain screw
2x #112 main jets
1x #45 jet
1x idle mix screw
Parts I am looking for:
NOS piston ring set
GL500 tach w/temp gauge
Running 78-81 CX500 engine somewhere near Detroit.
1978 cx500
|
|
|
|
|
Report
|
|
|
|
|
05-10-2010, 6:35 PM
|
philbrewer
Joined on 04-26-2010
Detroit, MI
Posts 149
|
Re: Parts from my 78 CX project
|
|
|
|
|
|
Sorry. $25 for the dash
1978 cx500
|
|
|
|
|
Report
|
|
|
|
|
05-10-2010, 8:28 PM
|
mnd
 
Joined on 05-24-2009
Manassas Park, VA
Posts 92
|
Re: Parts from my 78 CX project
|
|
|
|
|
|
$25 for the speedo/tach/dash pod?
If so... I'll take it.
'78 CX500
|
|
|
|
|
Report
|
|
|
|
|
05-11-2010, 8:51 AM
|
philbrewer
Joined on 04-26-2010
Detroit, MI
Posts 149
|
Re: Parts from my 78 CX project
|
|
|
|
|
|
Dash sold. Everything else is still available. I may have more parts soon.
1978 cx500
|
|
|
|
|
Report
|
|
|
|
|
05-11-2010, 8:59 AM
|
WraithsLotus
Joined on 05-04-2010
San Antonio, TX
Posts 26
|
Re: Parts from my 78 CX project
|
|
|
|
|
|
guess you dont have a right side rectangular mirror do yah?
1981 Honda Silverwing GL500
My first bike!
|
|
|
|
|
Report
|
|
|
|
|
05-11-2010, 9:30 AM
|
philbrewer
Joined on 04-26-2010
Detroit, MI
Posts 149
|
Re: Parts from my 78 CX project
|
|
|
|
|
|
I have right side circle mirror, in good shape.
1978 cx500
|
|
|
|
|
Report
|
|
|
|
|
05-11-2010, 4:34 PM
|
WraithsLotus
Joined on 05-04-2010
San Antonio, TX
Posts 26
|
Re: Parts from my 78 CX project
|
|
|
|
|
|
damn, Do you have a set? I need a right side rectangular one, but a set of circle would prolly be good aswell.
1981 Honda Silverwing GL500
My first bike!
|
|
|
|
|
Report
|
|
|
|
|
05-11-2010, 6:49 PM
|
philbrewer
Joined on 04-26-2010
Detroit, MI
Posts 149
|
Re: Parts from my 78 CX project
|
|
|
|
|
|
Yea I have them both. They are in really nice shape. $25 +shipping I'll try to post a pic later tomorrow.
1978 cx500
|
|
|
|
|
Report
|
|
|
|
|
05-21-2010, 8:30 PM
|
motorcyclebaby
Joined on 02-25-2010
Brooklyn, NY
Posts 61
|
Re: Parts from my 78 CX project
|
|
|
|
|
|
What about the fork piston? I have a bent left piston. Just want to replace it and ride.
1981 Honda CX500c
1975 Honda CL360
|
|
|
|
|
Report
|
|
|
|
|
05-21-2010, 9:45 PM
|
philbrewer
Joined on 04-26-2010
Detroit, MI
Posts 149
|
Re: Parts from my 78 CX project
|
|
|
|
|
|
Maybe. What is a fork piston? Sorry.
1978 cx500
|
|
|
|
|
Report
|
|
|
|
|
05-21-2010, 9:55 PM
|
motorcyclebaby
Joined on 02-25-2010
Brooklyn, NY
Posts 61
|
Re: Parts from my 78 CX project
|
|
|
|
|
|
It's the upper part of the fork that goes in the triple tree. 1978-1980 is 37mm diameter.
1981 Honda CX500c
1975 Honda CL360
|
|
|
|
|
Report
|
|
|
|
|
05-22-2010, 7:07 PM
|
philbrewer
Joined on 04-26-2010
Detroit, MI
Posts 149
|
Re: Parts from my 78 CX project
|
|
|
|
|
|
Then yes. I have both. I can take pictures and post them tomorrow if you like.
1978 cx500
|
|
|
|
|
Report
|
|
|
|
|
05-22-2010, 7:54 PM
|
motorcyclebaby
Joined on 02-25-2010
Brooklyn, NY
Posts 61
|
Re: Parts from my 78 CX project
|
|
|
|
|
|
Even better if you can measure it. I'm seeing that some fork legs are 33mm. But mine are 37. Oh, manuals call them legs. I saw "piston" somewhere...The Brits call them stanchions. *sigh* (geez, people, let's get a standard here! just kidding.)
1981 Honda CX500c
1975 Honda CL360
|
|
|
|
|
Report
|
|
|
|
|
05-23-2010, 12:08 PM
|
philbrewer
Joined on 04-26-2010
Detroit, MI
Posts 149
|
Re: Parts from my 78 CX project
|
|
|
|
|
|
Mine are 33mm.
1978 cx500
|
|
|
|
|
Report
|
|
|
|
|
05-24-2010, 12:30 PM
|
Jayboy
Joined on 05-19-2010
Iowa City, IA
Posts 3
|
Re: Parts from my 78 CX project
|
|
|
|
|
|
Would you have a muffler to sell? Either side, can be ugly but must still have baffle.
1978 CX500
|
|
|
|
|
Report
|
|
|
|
|
05-24-2010, 12:57 PM
|
philbrewer
Joined on 04-26-2010
Detroit, MI
Posts 149
|
Re: Parts from my 78 CX project
|
|
|
|
|
|
the exhaust was is in great shape, gonna keep that.
1978 cx500
|
|
|
|
|
Report
|
|
|
|
|
05-26-2010, 11:58 AM
|
Cocapelli
Joined on 05-25-2010
Columbus ohio
Posts 20
|
Re: Parts from my 78 CX project
|
|
|
|
|
|
might have an engine shortly one head is removed and the other has a white crystaly powder arround the head gasket. right side cylinder looks good was going to try to reseal the minor leaks and reinstall but i bought a used engine... im in columbus ohio.
Btw.. Engine was running when i removed it. i was just parinoid about the powder.
Bad spelling and shot gun puncuation.
|
|
|
|
|
Report
|
|
|
|
|
05-26-2010, 3:25 PM
|
motorcyclebaby
Joined on 02-25-2010
Brooklyn, NY
Posts 61
|
Re: Parts from my 78 CX project
|
|
|
|
|
|
I was wrong. Mine ARE 33. But now I have 35mm. And found a caliper for it! Thanks much anyway.
1981 Honda CX500c
1975 Honda CL360
|
|
|
|
|
Report
|
|
|
|
|
05-26-2010, 5:58 PM
|
philbrewer
Joined on 04-26-2010
Detroit, MI
Posts 149
|
Re: Parts from my 78 CX project
|
|
|
|
|
|
<BLOCKQUOTE><table width="85%"><tr><td class="txt4"><img src="/cs/Themes/default/images/icon-quote.gif"> <strong>Cocapelli wrote:</strong></td></tr><tr><td class="quoteTable"><table width="100%"><tr><td width="100%" valign="top" class="txt4">might have an engine shortly one head is removed and the other has a white crystaly powder arround the head gasket. right side cylinder looks good was going to try to reseal the minor leaks and reinstall but i bought a used engine... im in columbus ohio.
Btw.. Engine was running when i removed it. i was just parinoid about the powder.</td></tr></table></td></tr></table></BLOCKQUOTE>
I'll be in Lexington Ohio July 10 for AMA vintage motorcycle swap meet. Let me know where/when/how much!
1978 cx500
|
|
|
|
|
Report
|
|
|
|
|
06-01-2010, 10:34 AM
|
philbrewer
Joined on 04-26-2010
Detroit, MI
Posts 149
|
Re: Parts from my 78 CX project
|
|
|
|
|
|
Bump, some parts have sold. Most still available.
1978 cx500
|
|
|
|
|
Report
|
|
|
|
|
06-01-2010, 6:31 PM
|
Jayboy
Joined on 05-19-2010
Iowa City, IA
Posts 3
|
Re: Parts from my 78 CX project
|
|
|
|
|
|
I will take right side cover if still available
1978 CX500
|
|
|
|
|
Report
|
|
|
|
|
06-02-2010, 9:27 AM
|
need4steed
Joined on 11-06-2008
Joliet IL
Posts 659
|
Re: Parts from my 78 CX project
|
|
|
|
|
|
do you have a complete set of carbs? if so how much. send email to liverpol98@aol.com
What dont kill you makes you more strong...metallica
1980 CX500 (sold)
1982 GL500 (cafe) AKA black bomber (473 Miles since finished build)
1980 xs850 yamaha (sold)
1979 CX500 (Track Bike)
72 cl350 (cafe project #2) AKA Ol Goat
|
|
|
|
|
Report
|
|
|
|
|
06-02-2010, 2:09 PM
|
Joel
Joined on 08-13-2009
Grand Rapids, Michigan
Posts 621
|
Re: Parts from my 78 CX project
|
|
|
|
|
|
I think I have the radiator shroud for the cx500. I'll bring it along.
Lets work something out for the handlebars. If there the ones I'm looking for.
Mine are bent, I'll bring mine along to compare.
1971 Yamaha 360
1977 Xr75
1973 Cl350
1980 cx500 custom
1983 gl650i
1969 Norton Commando Fastback 750 project (x2)
|
|
|
|
|
Report
|
|
|
|
|
06-02-2010, 4:50 PM
|
philbrewer
Joined on 04-26-2010
Detroit, MI
Posts 149
|
Re: Parts from my 78 CX project
|
|
|
|
|
|
Sounds good. I'll give you a call tomorrow when I get the header pipe. Handlebars for rad shroud sounds good.
1978 cx500
|
|
|
|
|
Report
|
|
|
|
|
06-10-2010, 8:56 AM
|
philbrewer
Joined on 04-26-2010
Detroit, MI
Posts 149
|
Re: Parts from my 78 CX project
|
|
|
|
|
|
Still have this stuff. I'm also thinking about selling the seat if anyone is interested. It has been recovered and is in good shape no rips/tears and the pan has almost 0 rust. I also have the speedo/tach/dash (working w/28k miles) from another 78, it is ok but has a crack in the plastic.
1978 cx500
|
|
|
|
|
Report
|
|
|
|
|
06-22-2010, 7:01 PM
|
philbrewer
Joined on 04-26-2010
Detroit, MI
Posts 149
|
Re: Parts from my 78 CX project
|
|
|
|
|
|
Added more stuff.
1978 cx500
|
|
|
|
|
Report
|
|
|
|
|
06-23-2010, 2:04 PM
|
need4steed
Joined on 11-06-2008
Joliet IL
Posts 659
|
Re: Parts from my 78 CX project
|
|
|
|
|
|
<BLOCKQUOTE><table width="85%"><tr><td class="txt4"><img src="/cs/Themes/default/images/icon-quote.gif"> <strong>philbrewer wrote:</strong></td></tr><tr><td class="quoteTable"><table width="100%"><tr><td width="100%" valign="top" class="txt4">Still have this stuff. I'm also thinking about selling the seat if anyone is interested. It has been recovered and is in good shape no rips/tears and the pan has almost 0 rust. I also have the speedo/tach/dash (working w/28k miles) from another 78, it is ok but has a crack in the plastic.<br><br><img src="http://bivins.biz/media/catalog/product/cache/1/small_image/135x135/5e06319eda06f020e43594a9c230972d/f/i/file_15_81.jpg"><br></td></tr></table></td></tr></table></BLOCKQUOTE>
how much for that guage set shipped to 60435. thanks
What dont kill you makes you more strong...metallica
1980 CX500 (sold)
1982 GL500 (cafe) AKA black bomber (473 Miles since finished build)
1980 xs850 yamaha (sold)
1979 CX500 (Track Bike)
72 cl350 (cafe project #2) AKA Ol Goat
|
|
|
|
|
Report
|
|
|
|
|
06-23-2010, 8:09 PM
|
philbrewer
Joined on 04-26-2010
Detroit, MI
Posts 149
|
Re: Parts from my 78 CX project
|
|
|
|
|
|
$5 should cover the shipping so $60? If you think that's too much let me know we can work something out. I'm not looking to make anything just fund more parts I need.
1978 cx500
|
|
|
|
|
Report
|
|
|
|
|
06-27-2010, 1:23 PM
|
philbrewer
Joined on 04-26-2010
Detroit, MI
Posts 149
|
Re: Parts from my 78 CX project
|
|
|
|
|
|
I also have:
Center stand -$10
H-box - $20
Rear fender (under)- $15
1978 cx500
|
|
|
|
|
Report
|
|
|
|
|
06-29-2010, 2:55 PM
|
philbrewer
Joined on 04-26-2010
Detroit, MI
Posts 149
|
Re: Parts from my 78 CX project
|
|
|
|
|
|
Seat $75
Dash $50
1978 cx500
|
|
|
|
|
Report
|
|
|
|
|
06-30-2010, 8:38 AM
|
dean
Joined on 06-13-2007
Pittsboro, NC
Posts 511
|
Re: Parts from my 78 CX project
|
|
|
|
|
|
hey phil,
just wondering if you got my most recent pm to you on shep's site.
06 FZ6
80 CX500 Custom (project)
83 Gl650I (given back to original owner)
|
|
|
|
|
Report
|
|
|
|
|
06-30-2010, 11:36 PM
|
philbrewer
Joined on 04-26-2010
Detroit, MI
Posts 149
|
Re: Parts from my 78 CX project
|
|
|
|
|
|
I'll have to check. PM me here on this site or email philbrewer AT gmail DOT com
1978 cx500
|
|
|
|
|
Report
|
|
|
|
|
07-01-2010, 10:30 AM
|
dean
Joined on 06-13-2007
Pittsboro, NC
Posts 511
|
Re: Parts from my 78 CX project
|
|
|
|
|
|
 philbrewer wrote: | I'll have to check. PM me here on this site or email philbrewer AT gmail DOT com
|
|
well, you have now have a pm on this site. :)
06 FZ6
80 CX500 Custom (project)
83 Gl650I (given back to original owner)
|
|
|
|
|
Report
|
|
|
|
|
07-11-2010, 6:47 PM
|
dean
Joined on 06-13-2007
Pittsboro, NC
Posts 511
|
Re: Parts from my 78 CX project
|
|
|
|
|
|
another pm phil
06 FZ6
80 CX500 Custom (project)
83 Gl650I (given back to original owner)
|
|
|
|
|
Report
|
|
|
|
|
Honda CX500 & G... » CX500 GL500 Tra... » Selling and Buy... » Re: Parts from my 78 CX project
|
|
|
|