|
|
Technical Help Forum
Started by cxdavid at 07-15-2010 1:36 PM. Topic has 4 replies.
 
 
|
|
Sort Posts:
|
|
|
|
07-15-2010, 1:36 PM
|
cxdavid
Joined on 05-09-2009
bedford Indiana
Posts 30
|
Left side missing out
|
|
|
|
|
serious tech head question. Left cyl missing but only part of the time.Started all at once not carb. related. coil swaped everthing eliminated back to black box under seat. Dont quite know what the box does. Can anybody help with testing there back?
1980 cx500D
60k on motor
Its a daily driver.
Misses occasionaly at idle
Misses consistantly on acceleration
Misses steady off and on at 2500 RPM
Doesnt miss at over 4000RPM
1980 cx500 deluxe
|
|
|
|
|
Report
|
|
|
|
07-15-2010, 2:10 PM
|
Blue fox

Joined on 04-18-2008
COLUMBIA, MISSOURI
Posts 1,533
|
Re: Left side missing out
|
|
|
|
|
You say it is not carb related, but the symptoms in your signature block would indicate that it could be. The black box under the seat is the CDI module. It takes the output from the stator and times a electric pluse to the coils to fire the plug. They can go bad, altho I don't know if just one side output dropping out is common. The only reliable way to test is to swap with a good unit. There is a test for the low and high speed windings in the stator, I believe that can be found under the first post in General Discussion section.
Blue Fox 1983 GL650I, 79-CX500C, 1980 CX500C, 82-GL500I, 82-GL1100, 76-CB550, 81-CB750C, 73-CB350F, 71-CT90,
|
|
|
|
|
Report
|
|
|
|
07-17-2010, 9:30 AM
|
dawoluff
Joined on 07-17-2010
Posts 1
|
Re: Left side missing out
|
|
|
|
|
OH My Friend-- I feel your pain-- 80 cx500deluxe Same problem with a slight variation- mine runs out fine until warmed up, then wants to crap out in the 5k range on the tach, no matter what gear. I've done some research on the 'black box' and it is basically an ignition module that runs off a pulse generator on the alternator. Internally, it has a circuit that advances the spark as revs go up. Possibly the box breaks down at certain RPM, but it is difficult to find a new one, so I talked to a friend who has had one forever, and he suggested that before I chase down a new module, that I adjust the tension on the cam chain. -- This could make sense-- GOOD LUCK
|
|
|
|
|
Report
|
|
|
|
07-17-2010, 9:42 AM
|
Shep

Joined on 01-30-2007
UK.2x1980CX500A
Posts 7,647
|
Re: Left side missing out
|
|
|
|
|
|
|
|
07-19-2010, 3:37 PM
|
cxdavid
Joined on 05-09-2009
bedford Indiana
Posts 30
|
Re: Left side missing out
|
|
|
|
|
Ya it sucks! Thanks for your help everybody. Hey dawoluff if you adjust your tention on the cam chain and you have any luck let me know!Thanks again!
1980 cx500 deluxe
|
|
|
|
|
Report
|
|
|
|
|
Honda CX500 & G... » CX500 GL500 Tra... » Technical Help ... » Re: Left side missing out
|
|
|
|